Vertical
System |
|
| Mode | Y1, Y2, ALT, CHOP, ADD, X-Y |
| Sensitivity | 5mV/Div
~ 10V/Div (1-2-5, 11 steps, ¡À 5%) |
| Magnification Ratio | X5 ¡À 10% |
| Bandwidth | DC:
0 ~ 30MHz AC: 10Hz ~ 30MHz |
| Rise Time | ¨Q12ns |
| Overshot | ¨Q 5% |
| Damp | ¨Q 5% |
| Coupling | AC, GND, DC |
| Input Impedance | 10Mohm ¡À 5%, 23pF ¡À 5pF |
| Maximum Input | 400V (DC + AC peak) |
| Polarity Inverter | Only CH2 |
Horizontal
System |
|
| Mode | Auto, Trig, Trig Lock, Single Time |
| Sweep Rate | 0.1us/Div
~ 0.2s/Div (1-2-5 20 steps ¡À 5%) |
| Sweep Magnification | X5, ¡À 10% |
Triggering
System |
|
| Triggering Source | Y1, Y2, ALT, Line, External |
| Coupling | AC coupling |
| Polarity | +, - |
| Sync Frequency Range | 50Hz ~ 30MHz |
| Triggering Sensitivity | Trig:
5Hz ~ 30MHz Trig Lock: 20Hz ~ 10MHz |
| Input Impedance | 1Mohm ¡À 5%, ¨Q30pF |
X-Y
Mode |
|
| Input | Y-Axis (Y2), X-Axis (Y1) |
| Deflection | Same as Y1 |
| Bandwidth | DC:
0 ~ 1MHz AC: 10Hz ~ 1MHz |
| Impedance | Same as Y1 |
| Maximum Input Voltage | Same as Y1 |
| X-Y Phase Error | ¨Q 3 Degree |
Z-Axis
System |
|
| Vmin | TTL logic |
| Vmax | 50V (DC + AC) |
| Impedance | 10kohm |
| Input Effect | Low Level to Intensification |
Calibration |
|
| Waveform | Rectangle |
| Amplitude | 0.5Vpp ¡À 2% |
| Frequency Range | 1kHz ¡À 2% |
Power
Supply |
|
| Voltage | 220V ¡À 10%, 50Hz ¡À 5% |
| Consume | 35W |
CRT |
|
| Persistence | Medium |
| Valid Area | 8 Div x 10 Div |
Other |
|
| Dimension / Weight | 320 x 130 x 400
mm, Approximate 7.2kg |
BS6030
30MHz Analog Oscilloscope