Vertical System |
||
| Sensitivity | 5mV/Div - 5V/Div (1-2-5, 10steps) (X5: 1mV/Div - 1V/Div) |
|
| Variable Ratio |
2.5:1 | |
| Bandwidth | DC - 40MHz | |
| 10Hz - 40MHz (5mV/Div) | ||
| Overshot | 5% | |
| Rise Time | 8.8ns | |
| Input Impedance | 10Mohm, 17pF | |
Maximum Input |
400V (DC + AC peak) | |
| Coupling | AC, GND, DC | |
| Polarity Inverter | Only CH2 | |
Horizontal System |
||
| Mode | X1, X5; X1, X5 Alter |
|
| Sweep Rate | 0.1us/Div - 0.2s/Div (1-2-5 20 steps) |
|
| Sweep Magnification | 20ns/Div - 40ms/Div | |
| Alter-Mag. | 4 Trace | |
| Trace Separate | 1.5Div | |
Triggering System |
||
| Triggering Mode | Auto, Normal, TV-V, TV-H | |
| Triggering Source | INT, CH2, Line, Ext. | |
| Polarity | +, - | |
| Coupling | AC coupling | |
Triggering |
Normal | 10Hz - 40Mhz 2Div, Ext. 0.3V |
| Auto | 20Hz -40Mhz 2Div, Ext. 0.3V |
|
| TV sync | 1 Div, Ext 1Vpp | |
X-Y Mode |
||
| Gate Value | Y (same as CH2), X (same as CH1), X1:¡Ó5%, X10: ¡Ó10% |
|
| X Bandwidth | DC -2Mhz | |
| Phase Error | ¡Ø 3 Degree | |
Z Axis |
||
| Input Impedance | 33kohm | |
| Input Voltage | 30V (DC + AC peak) Frequency ¡Ø 1kHz | |
| Bandwidth | DC -1MHz | |
Calibration |
||
| Frequency | 1kHz ¡Ó 2% | |
| Amplitude | 0.5Vpp ¡Ó 2% | |
Power Supply |
||
| Voltage | 220V ¡Ó10%,
50Hz ¡Ó 5% |
|
| Consume | 35W | |
CRT |
||
| Accelerate Voltage | Approximate 12kV | |
| Valid Area | 8 Div x 10 Div | |
Other |
||
| Working Temperature/Humidity |
0 - 35 degree C, 85% | |
| Storage Temperature/Humidity |
-20 -70 degree C, 70% | |
| Dimension / Weight | 132 x 321 x 376 mm, Approximate 7.2kg | |
BS7040
40MHz Universal Oscilloscope